ISOLED Sys-Pro radio RF motion detector MiniAMP with inverted function
Product-No. 114666     

ISOLED Sys-Pro radio RF motion detector MiniAMP with inverted function

Sys-Pro Radio RF Motion Detector MiniAMP with inverted function for UV-C, 9-24V

Delivery time: 3 - 5 Days
Country:
Width

42 mm

Manufacturer

ISOLED

Height

22 mm

Material

Plastic

Voltage

24 V

Length

73 mm

IP protection class

IP 20

Housing color

White

UVP 62,30 €
-43%
35,50 €
plus 19% tax, plus shipping
(Gross price 42,25 €)
Compare
Add to watchlist
Ask question
Downloads & datasheets

Product description ISOLED Sys-Pro radio RF motion detector MiniAMP with inverted function

ISOLED Sys-Pro radio RF motion detector MiniAMP with inverted function.

Special features:

The RF switch of the microwave motion sensor must be matched with one or more RF LED controllers or RF dimmableLED drivers to
turn light on or off by motion detection. The end user can select the appropriate matching/quenching method. Two options are provided for selection.

Use the Match button on the Connect controller:

First press the match button on the controller briefly and then immediately press the match button on the sensor. The LED indicator on the controller will blink rapidly a few times indicating that the pairing is successful.

Using the Power Restart Connect: 

Turn the receiver off and on 2x in a row, then press the ON/OFF button 3x for 1-zone remotes, or the zone button for multi-zone remotes. If the LED indicator now lights up 3x it means the remote control has been successfully connected

Functions:

Active microwave motion detector (working frequency 10.525GHz ) Motion can be detected through plastic, glass and thin non-metallic materials. Built-in motion sensor and daylight sensor. Powered by low voltage 9-24VDC, output signal RF 2.4G. Suitable for use with RF LED controller or RF dimmable LED driver. Detection range, light on time and wait time can be adjusted by rotary knob potentiometer. Large detection area, range up to 20m in diameter. Support higher mounting height 15m Max.

Notes:

The sensor is for indoor use only. The rain or wind may trigger the microwave sensor even if it is used outdoors without human movement. The sensor should be installed by a professional electrician. Please turn off the power before installing the sensor, wiring and changing the setting of the knob.

The distance between any two sensors should be at least 3m to avoid mutual interference. If the microwave sensor is installed in a metal lighting fixture or a room with a large reflector, for example, a warehouse with a metal roof, the microwave signal will be reflected and cause the lights to be permanently lit even if there is no motion signal.

Please reduce the detection range to solve the problems. Make sure the sensor is not near or blocked by high-density materials such as metal, glass, concrete walls, etc. These materials will reduce or block the microwave signal and cause false triggering.

The sensor installed in the plastic and glass lampshade will reduce the sensitivity. For every 3 mm increase in thickness, the sensitivity will decrease by 20%. Make sure there are no fans, DC motors or other vibrating objects in the installation area. The movement will also trigger the sensor.

Top brands